Drill and Blast
Engineering Series

Drill and Blast - Engineering Series

This intensive 4-day classroom course combines the following Units:

RIIBLA 403 Design Blast
RIIBLA 402 Monitor and Control the Effects of Blasting on the Environment

Course Content – refer to the single unit descriptors.

Course Delivery

Classroom Only – 4 days theory and assignment submissions:

  • Public program – Brisbane
  • Private program – min 10 attendees
  • Trainer – Peter Duniam (37 years in the Drill and Blast Industry)

Duration

  • 55 hours (nominal) excluding Underpinning Knowledge course.
  • Refer to the Underpinning Knowledge Course below – 13 hours (nominal)
  • Course is open for completion for 12 months from classroom date.

Reference Material will be provided in your course.

Blast Management Operations Manual is available to purchase on completion of the classroom course. $200 plus GST

Underpinning Knowledge Requirements

Successful attendees are required to demonstrate a level of underpinning knowledge in relation to drill and blast operations.

This may be demonstrated in one of the following ways:

  • Upload an existing Statement of Attainment awarded within the last five years for the following units of competency
     RIIBLA205 Store, Handle and Transport Explosives
    – RIIBLA301 Conduct Surface Shotfiring Operations
    – RIIBLA305 Conduct Secondary Blasting Operations
  • Complete a self-paced course covering the essential elements of Drill and Blast. This course covers 16 topics and is expected to take around 13 hours.
  • Complete the theory component of a Surface Shotfirer course. Note there is an additional cost for this.
  • Undertake RPL for the above units of competency. Note there is an additional cost for RPL.

Foundational Skills

  • Calculates measurements, products and ratios
  • Conveys information and requirements clearly and listens carefully
  • Identifies and interprets information from workplace documentation and legislation
  • Completes workplace and legislative documentation using sector-specific vocabulary, grammatical structures and conventions.

Equipment Requirements:

  • Access to a modern drill and blast design application:
    – A 2 week license to BLASTPLAN II is provided with the course.
    – You may also use DataBlast, Vulcan, Surpace and Minescape etc incorporating drill pattern design, charge and hook up design.
  • Computer with a camera and an internet connection.
  • Mobile phone (IOS or Android) running the SiteDocs APP.
  • Email Address
  • USI for Australian Residents.

[Note: Entry into this course does not guarantee employment.]

Contact BMI for more information and booking

Course Online Classroom
D&B – Engineering Series
N/A
$3300

Units of Competency

RIIBLA402E: Monitor and Control the Effect of Blasting on the Environment

< Australian Government Standard - Click to Read

If you require an Unrestricted Shotfiring License you’ll need to obtain this Unit of Competency. This is also recommended for Blast Design Engineers operating at sites with environmental constraints.

Document Example >
Document Example

RIIBLA403E: Design Blasts

< Australian Government Standard - Click to Read

Applicable for Drill and Blast Engineers with specific focus on Drill Pattern, Charge and Initiation design.

Document Example >
Document Example

Training Enquiry

Consulting Enquiry

BLASTPlan on white

Software Quote and Enquiry

Complete your details below and we’ll email you a quote for the BLASTPLAN ll: Drill and Blast Design Application. We’ll respond to any comments or questions you have in a separate email.

BMI Refund Policy

Try Before You Buy

BlastPlan-Pro software is available for purchase on the Blast Management International web site. This software products is available for download and is fully functional. We provide a 30-day free trial period to let you fully evaluate the software product to ensure it meets your needs prior to making a purchase decision.

During your trial period, our support staff are available to assist in installation and configuration via email, ticket or telephone. We strongly recommend that all customers download, install, and test the trial version of any BMI product prior to making a purchase.

No Refunds Post Purchase

After a cleared payment on the purchase of one of our products occurs, you will receive an email with the serial number required to unlock the software. Once this information is emailed to you, no refund will be given. This policy is in place since it would be impossible for you to return your registered version of our software.

We cannot issue a refund for any BMI software product given this licensing model. Please take advantage of the 30-day trial before you complete your purchase.

Refund Under Exceptional Circumstances

In rare instances and only within 30 days of purchase, if due to technical difficulties or platform incompatibilities the software will not function, we may, at our discretion, issue a refund minus our order processing and banking fees (up to 25% of the purchase price). In such instances, we require that you provide enough information for us to positively identify your purchase transaction (e.g., order number, your company name, date of transaction, purchase code, number of licenses purchased, etc.). If we are able to positively identify your order, and if your request is made within 30 days of purchase, you must submit to us a letter of destruction of software on your company letterhead before we will process the refund. BMI is not responsible for lost, delayed, or misdirected mail or email, delays for downloading, or other communication system delays.

USI Information

Students undertaking nationally recognised VET courses are required to have a Unique Student Identifier (USI). You can apply for your USI at www.usi.gov.au.

The USI is a reference number that is required if you are a new or continuing student undertaking accredited vocational study at BMI.

Who does the government require to have a USI?

You need a USI if you are undertaking a Nationally Recognised Training.  Without one, you will not be able to get your qualification unless you are undertaking a BMI course outside of Australia as an International Student.

When will you need to provide your USI to BMI?

You will need to have your USI on hand when completing the online enrolment form as part of the enrolment process at commencement of training.

Trainer Opportunity

Are you an experienced and motivated individual who wants to develop or expand your own business providing industry training in each of the Surface Drill and Blast Units of Competency? If so, we’re looking for you!


Blast Management International (BMI) is a Registered Training Organisation (RTO #31459) providing high quality training across most blasting industries including surface, underground metalliferous, construction, oil and gas, explosives/DG driver and special effects.

As an Independent Trainer aligned with BMI you will have access to training and assessment materials as well as marketing and sales support that will enable you to develop your own business providing Nationally Recognised Training to your own clients.

These units support applications for Shotfirer Licenses and may include those aimed at Drill and Blast Engineers, Supervisors and Superintendents.

This opportunity will suit people with skills in both training and surface blasting looking to leverage your industry knowledge and contacts into a sustainable, profitable business opportunity.

For more information or to arrange a confidential discussion email me at peter@blastmanagement.com.

Masterclass Enquiry

I’d like to find out more about the Manage Drill and Blast Operations Masterclass.